2013 Daytona - dealer updated my PCM, intune wants an update

[chief455]

I returned the car to stock / unmarried the tuner before service.
lucky me, with an oil change, a PCM update was done for me.
Now, I go to put my custom tune in, intune reads:" PCM for VIN XXXX may need to be updated, update now?" I click yes, it reads "connect intune to a PC with internet access"
I did that, the intune files opened, that's it. no updating.
I went to Diablosport site - nothing to do such an update.
I click update tool, it openes my 'tune' file, looks for a .crom file that is not there, or anywhere that I can find.
I have the unit plugged into my PC and can read the version: 1r041
LTW: none
Calid: 68171355AF
(next) 05150730AEkg460
veh VIN 2C3CDXCT5DH717581
boot: 4.1000
tune db: DCX1r01v
PID DB: DCX 1r01b
serial: J2FDTDF-4
custom: no
locked : 0 / 1
all other firmware versions read 'ok'
attached is the info file from my intune
HELP!!

[trax95008]

OP, just to let you know, the tuner is going to actually downgrade the PCM software that was installed by the dealer. id think twice about it. checkout this thread i started a while back

https://forum.diablosport.com/viewtopic ... 57&t=53076

[chief455]

OP, just to let you know, the tuner is going to actually downgrade the PCM software that was installed by the dealer. id think twice about it. checkout this thread i started a while back

https://forum.diablosport.com/viewtopic ... 57&t=53076

I already updated the PCM calibration and retuned my car. no regrets.
I read your concerns, and agree - Diablo should get the latest Chrysler PCM calibrations as they come out, and apply the 'tweaks' for performance.
But, as he stated - many things may not even be affected by the tuned parameters from Diablo...