Trinity t1000 error after crom update

General Trinity Support

Moderator: mikel

Post Reply
rsgators2001
Posts: 2
Joined: Tue Dec 06, 2016 5:57 pm

Trinity t1000 error after crom update

Post by rsgators2001 »

I upgraded my tuner and now cant reload my custom tune.. get this error
problem with custom tune
68041662ac wrong
wont be used
After calibration file format is PCM_68041662AF

I recently installed a Procharger and tune loaded car running fine. CROM updated forces you to load original tune so im not sure what to do from here...
User avatar
mikel
Posts: 58788
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Trinity t1000 error after crom update

Post by mikel »

did yo umarry the tool to the vehicle before you loaded the custom tune?
erase the custom tune, load a canned tune to the car then load the custom tune back to the device then to the vehicle.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
rsgators2001
Posts: 2
Joined: Tue Dec 06, 2016 5:57 pm

Re: Trinity t1000 error after crom update

Post by rsgators2001 »

Yes, My tuner responded and it was a version mismatch, so he redid the tune.. Unfortunately, the car , I think is im limp mode. Wont go into auto stick, seems to start out in second or third, when it revs up, acts like hitting rev limiter.. Gonna reload it and hope that fixes.

Edit: Went through each quick adjust and all is well.. Data logging now to fine tune it. Thanks
Post Reply

Return to “General Trinity”