NEED HELP WITH CL7140

warmongoose66 · Post by **warmongoose66** » Wed Apr 16, 2008 10:00 pm

Looks like I have and OLD version how can I get this to work.

CAL ID FOAN0A4
VERSION: V.8r26
05/02/2006

warmongoose66 · Post by **warmongoose66** » Thu Apr 17, 2008 8:51 am

Please some one help me out.

Vas@Diablosport · Post by **Vas@Diablosport** » Thu Apr 17, 2008 9:09 am

You will have to go to our website under Support/Product Support, choose your part number (i.e. CL7140) and download the updated software revision.

Thanks

warmongoose66 · Post by **warmongoose66** » Thu Apr 17, 2008 11:29 am

ok now my other question is will this update still have the tune for the C&L CAI

Post by **mikel** » Thu Apr 17, 2008 11:45 am

Yes, it will still have C&L tunes....

warmongoose66 · Post by **warmongoose66** » Thu Apr 17, 2008 5:28 pm

Thank you, I will be doing the update as soon as I get Home tonight, I have already purchase the Serial cables (DB9) and the power adapter. I have also the instructions as per your website. thank you very much for the support on this matter.

warmongoose66 · Post by **warmongoose66** » Thu Apr 17, 2008 10:14 pm

I am out of luck the tuner told me that ORIGINAL BACK UP not the same can not install tune, the good news is I contacted the seller (EBAY) and he will put original back up back in the tuner and mail it back to me. I hope

RedStang06 · Post by **RedStang06** » Fri Apr 18, 2008 10:26 am

So you bought a locked Predator on eBay and the seller didn't tell you it was locked?

RedStang06 · Post by **RedStang06** » Fri Apr 18, 2008 10:32 am

mikel wrote:Yes, it will still have C&L tunes....

Aren't the tunes still exactly the same in r26 and r28?

Post by **mikel** » Fri Apr 18, 2008 10:53 am

DONT BUY USED TOOLS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

warmongoose66 · Post by **warmongoose66** » Fri Apr 18, 2008 11:25 am

ok my bad //// I will not do it again. The offer was hard to pass up, The conditions of the C&L CAI and the Tuner are just like new the only problem was that he forgot to install the original tune before shipping , the seller said it was an honest mistake and that he will unlock the tunner and mail it back to me. I did learn my lesson. I will not buy USED TOOLS!!!!!!!!!!!!

brianbmxer · Post by **brianbmxer** » Fri Apr 18, 2008 11:28 am

Warning, I updated my CL7140 to rev 9r01 and it didn't have the C&L tunes on it. I was told to put the previous update 38 back in.

warmongoose66 · Post by **warmongoose66** » Fri Apr 18, 2008 2:36 pm

I did the update cl7140_cnl_05-8r28 (crom) 719k and it still boots up with all Tunes, 87 / 91 / / 93 / MODIFY STOCK / and I can not remember the other one. And My tuner is in route to the previous owner for unlocking. I should receive it back no later than Thursday.

NEED HELP WITH CL7140

NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

RE: NEED HELP WITH CL7140

Re: RE: NEED HELP WITH CL7140

RE: Re: RE: NEED HELP WITH CL7140

RE: Re: RE: NEED HELP WITH CL7140