Throttle Boost causing issues with Forward Collision Warning

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Pennbiker
Posts: 1
Joined: Wed Oct 07, 2015 3:05 pm

Throttle Boost causing issues with Forward Collision Warning

Post by Pennbiker »

Installed the 87 octane base tune from the i3 on my 2014 Durango with the 5.7L. No issues. I went back and added 10% throttle boost. Loving the results in terms of performance. However, it seems to have caused issues with my forward collision warning system. It's disabled and I get a "service required... " error when I try to enable it. Not sure if my adaptive cruise control is affected as well. Haven't tested that.

I have the latest updates as of 12/12/2019. Is this expected? Is there a fix for this issue?
User avatar
mikel
Posts: 58698
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Throttle Boost causing issues with Forward Collision War

Post by mikel »

I've never seen this before.
Can you go back to stock and confirm its working, then reload the tune with no changes and confirm its good there as well?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”