Searching for diablosport tool

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Reply
blackstryker
Posts: 4
Joined: Sat Jan 11, 2020 10:36 pm

Searching for diablosport tool

Post by blackstryker »

I have a 2010 Charger SRT running version v.1t13id on the tool. I did some heavy mods about 5 years ago and did some serious CMR tuning and stopped using the tool. Had some engine mods done recently which req'd a new tune; however, I cannot get the tool to connect to my computer.

I'm running Win 10, build 1903. Have installed DSDL v 2.5.0.14, and DS USB Drivers v 2.3. *I have not tried swapping the USB cord yet*

The device powers on and able to get any and all information under the option menu if needed. In device manager on my computer, I do not see anything related to Diablosport. I see an Intel Active Management Tech - SOL using COM port 3. I've tried switching the port thinking this may be taking priority over the tool, but no luck.

Any thoughts would be greatly appreciated.
blackstryker
Posts: 4
Joined: Sat Jan 11, 2020 10:36 pm

Re: Searching for diablosport tool

Post by blackstryker »

It was the cable.

There are cables that only have the capability for charging which will not work. If you lost the original cable that came with the Trinity search for a sync and charge cable :)
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Searching for diablosport tool

Post by mikel »

good find :)
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply