2014 RAM 8 speed (Transmission tuning)

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
davidjacobs
Posts: 12
Joined: Fri Jan 10, 2020 11:51 am

2014 RAM 8 speed (Transmission tuning)

Post by davidjacobs »

Hi all,
so a quick question on trans tuning, specifically shift points. From what I've read here and elsewhere, I understand that for (or most) 2014 Ram 8 speeds, we cannot tune or change the shift points for our vehicles. Is there anyway to be able to do this? Reason for asking is that I've installed a new cam but with the low shift points (well below 6000 rpm), the benefits of a more open cam are negated.

Any input or suggestions appreciated,
Thanks.
User avatar
mikel
Posts: 58707
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2014 RAM 8 speed (Transmission tuning)

Post by mikel »

some 14 ram tcm cals are supported.
Post the info file from your device so i can check it out.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
davidjacobs
Posts: 12
Joined: Fri Jan 10, 2020 11:51 am

Re: 2014 RAM 8 speed (Transmission tuning)

Post by davidjacobs »

Hey Mike,
.xml file uploaded. I suspect I'm one of the unlucky few.

Cheers,
david
You do not have the required permissions to view the files attached to this post.
User avatar
mikel
Posts: 58707
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2014 RAM 8 speed (Transmission tuning)

Post by mikel »

Yeah, unfortunately this is not a cal thats shared with 2015, 68234060AB.


Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”