2014 ram

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Amermuscle
Posts: 28
Joined: Thu Feb 13, 2020 3:45 pm

Re: 2014 ram

Post by Amermuscle »

Ok I'll try to give u a call real quick
Amermuscle
Posts: 28
Joined: Thu Feb 13, 2020 3:45 pm

Re: 2014 ram

Post by Amermuscle »

After the force calibration it asked me when I get into truck to calibrate the pcm . Is this normal should I hit no ? I'm just wondering if that shutting off the chance of it reading the tcm.
You do not have the required permissions to view the files attached to this post.
Amermuscle
Posts: 28
Joined: Thu Feb 13, 2020 3:45 pm

Re: 2014 ram

Post by Amermuscle »

I did a force calibration not sure if he knew what I was asking . I forced it went too the computer like he said to update calibrations . So I come to truck and it ask install pcm calibration to truck I said yes . Should I have said no ? It asked before it took a backup of the pcm and tcm . I'll call back on monday thanks for your time.
You do not have the required permissions to view the files attached to this post.
Amermuscle
Posts: 28
Joined: Thu Feb 13, 2020 3:45 pm

Re: 2014 ram

Post by Amermuscle »

I did another update and it worked , thank you . The trans tuning makes a world of diffrence happy it worked
User avatar
mikel
Posts: 58694
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2014 ram

Post by mikel »

Good deal. Too bad all the 14 TCM cals are not supported, the tune really does help these trucks.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”