Truck won’t start after attempting to tune

This area of the forum is for discussions relating to the T2 monitor/tuner on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Bushviper5.7
Posts: 2
Joined: Fri Mar 03, 2023 11:07 pm

Truck won’t start after attempting to tune

Post by Bushviper5.7 »

2004 Dodge Ram 1500 5.7L
I had just gotten the T2 shipped in today. It refuses to connect to WiFi but I attempted to install a tune and the device disconnected after an accidental bump.

It doesn’t recognize the vehicle in run mode and the truck won’t even attempt to start. Can I please get some help here, I can’t afford to be off the road over the weekend.
Bushviper5.7
Posts: 2
Joined: Fri Mar 03, 2023 11:07 pm

Re: Truck won’t start after attempting to tune

Post by Bushviper5.7 »

Disregard. Was able to restore factory settings after a few attempts
User avatar
mikel
Posts: 57793
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Truck won’t start after attempting to tune

Post by mikel »

good to hear. if you had issues, there could be an electronics or other issue on the vehicle.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply