I3 8300 won’t turn MDS off 13’ ram 1500

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Hunterw16
Posts: 1
Joined: Tue Aug 08, 2023 8:42 pm

I3 8300 won’t turn MDS off 13’ ram 1500

Post by Hunterw16 »

It will not let me upload the video but if I go under modify and go to turn MDS off under advanced tuning even if I hit off and hit the yes button, it still goes back to MDS on. Anyone else have this issue?
User avatar
mikel
Posts: 58685
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: I3 8300 won’t turn MDS off 13’ ram 1500

Post by mikel »

you set it to off then save the change?

if so just back out and select apply tune, it should be off.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
keithw923
Posts: 1
Joined: Tue Nov 07, 2023 6:46 pm

Re: I3 8300 won’t turn MDS off 13’ ram 1500

Post by keithw923 »

Hunterw16 wrote: Tue Aug 08, 2023 8:44 pm It will not let me upload the video but if I go under modify and go to turn MDS off under advanced tuning even if I hit off and hit the yes button, it still goes back to MDS on. Anyone else have this issue?
I have the same problem happening on my 2012 1500. I select off and save then when I check back it says on still.
User avatar
mikel
Posts: 58685
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: I3 8300 won’t turn MDS off 13’ ram 1500

Post by mikel »

keithw923 wrote: Tue Nov 07, 2023 6:51 pm
Hunterw16 wrote: Tue Aug 08, 2023 8:44 pm It will not let me upload the video but if I go under modify and go to turn MDS off under advanced tuning even if I hit off and hit the yes button, it still goes back to MDS on. Anyone else have this issue?
I have the same problem happening on my 2012 1500. I select off and save then when I check back it says on still.
if you turn it off then load the tune, its off. The default selection in the menu is on, hence you'll always see ON highlighted, but that is not an indication of the currently programmed status in the pcm.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”