predator won't back up original memory

[knorton]

hi , i tried to install the predator and followed instructions but came up saying it did not see ignition, maybe a performance module installed,and original back up not saved. showing codes p0602, p0605, p1211,p1690.
please tell me what i need to do.
keith
jamaica

[cole]

Did you ever have the product installed before?

[knorton]

hi, i purchased this truck used and this is the first time i am trying anything like this.i will be checking if there is any chip plugged in the computer, but if not what can i do?
2000 ford f250 , serial# doo4c2d, V9R01,calid VOAA8R4

Keith

[johnc]

Call support on Monday, someone will need to look up the codes and step you through the install.

[mikel]

These are not active codes, the Predator is simply stating that those codes are normal for a tuned vehicle...

[knorton]

Hi, i just removed the computer box and there is no chip plugged into it,
please let me know what is my next step.
thanks again guys,
Keith

[mikel]

OK, try this.
Go to options/troubleshooting/verification.
Turn verification off, then attempt to install the tune, let me know if that works...

Thanks

[knorton]

hI ,I Tried that and then attempted to install but came back with the same results,any other things i can try?
thanks
keith
Jamaica

[mikel]

If it would not save it with Verification off, then I do not know what it could be.
Best suggestion I can make now is to have the truck reflashed at a Ford dealer.

Thanks

[knorton]

Is there anything i can try before sending this Predator back as you know i am in jamaica. i have gotten another computer and it still reads as above, what could the problem be. I purchased this unit from Extreme Diesel online.
thanks
Keith

[mikel]

Short of having the PCM reflashed by a Fprd dealer, I do not have any other suggestions at this point.

[knorton]

ok i will have it reflashed and will let you know what happens

[knorton]

hey guys i finally got the predater to work one problem can this tool be used to change the speed limit settings and how do i do it.Speed limiter trips at 87mph.
thanks again
Keith

[jbeasts10]

Before you install the tune ..you have the option to modify parameters.select modify parameters.. then you should see another menu...select speed limiter.Hope this helps.

[knorton]

i did some fiddling around and then test drive now its going up to 100mph + its awesome.
Thanks all