OBD II Test?

[Autin-C6]

I have an 07 Corvette and tuned it using the u7194 93 Octane tune some time ago; It has headers with hi-flow cats and all O2 sensors connected but I have not fine tuned it, yet..

My car is due for inspection this month and I’m wondering if it will pass here in Texas. As long as the sensors are operational there should not be a problem; is this correct? Does anyone have any thoughts as to whether or not I’ll have to reinstall the original tune for the inspection or should I pass with the new tune.

Thanks,

JR

[06MonteSS]

as long as all of the readiness tests in the ECM are complete, and you don't have a check engine/SES light or any DTC codes thrown, you'll be all set...

emissions "readiness" tests by the ECM -- if you've been driving on the tune for more than a week or two, they will be fine...

[Autin-C6]

Great That had me concerned especially since my time is pretty short between business trips. I'll probably get it inspected next week, on the off chance it fails I'll have to reinstall the original tune then drive it around for awhile to let the new tune cycle in; luckily premium is down to $2.29 in Austin.

Thanks Lew,

JR

[06MonteSS]

np man...