Software for modify ECU firmwares from predator?

[727]

Hello. And sorry for question

What a program draw in picture on this page: http://diablosport.com/index.php?module ... ay&pid=118 (at the right)?

Sry for my English Please help (screen of software was attached)

[06MonteSS]

that picture is of Diablosport's CMR tuning software, which is for dealers/tuners - that is the software that is used to create the tunes that are in your predator, and for creating custom tunes. It's not something that is available to you/end-users.

what software revision is your predator on?? after it boots up and is at the main menu, there's a number at the top of the screen - that is the revision number. what is it?

[727]

Fine Сan you post your cost for software?

We need to change the ECU Grand Cherokee SRT-8 (2008) with Predator 7135.
GS Motorsports has us ... We having 2 calibrations ... and those aren't work fine (((

[johan]

You can post up your calibrations here as well as your mods list and whatever issues you have and we can check it out for you.

[727]

You can post up your calibrations here as well as your mods list and whatever issues you have and we can check it out for you.

Thanks!

We have a kit from GSMotorsport. Those are:
1. Compressor Paxton Novi 1500 with intercooler system.
2. Forced Fuel Injectors (5 dot on injector surface) [original injector has 4 dot on surface).
3. Having two MAP Sensors. Original & Tuned. Original was display 97Kpa (+-) ... Tuned from GS = 54 Kpa (+- it taken CHECK-error by "Too low barometric pressure" ... and AT going to "safe mode").

Problem with working on idle-RPM. When easy-pressing accelerator pedal ... RPM was waving. Sometimes engine stop.

Please, sorry for my English

Here two calibration (Original + Tuned from GSMotorsport Kit):

[Mike_Levy]

Of course you realize that the real problem isn't the tune, its the GSM Kit. Everything they do, they do half assed. I've seen their blower kit blow numerous motors, and have seen, in person, the poor quality of their assembly work. Also, I have their heads on my motor and basically had to redo the port and polish work myself, as well as redo the valvetrain. Absolute trash.

[727]

I'm Agree with you About trash & ass))) But maybe anybody can post here your calibration file? Or modify upper uploaded O:-)

[johan]

Do you know if the map sensor is from an srt4 and do you know what injectors are on it?
You are using larger injectors rather than the auxiliary ones that come with the kit originally right?

[johan]

That file appears to be corrupted, you can e-mail me the file.
E-mail in sig below.

[727]

About injectors - we using injectors from Kit. There are larger than stock (original). We don't having another injectors ) Or maybe i don't understand - what do you mean?

MAP sensor in GSMoto kit: CHRYSLER/DODGE SEBRING 2.4L ENG MAP SENSOR #05033224AB It's PORN))) We make leveling resistor (to change Omhs). It's work ... but it isn't right
Original (Stock): CHRYSLER# 56041018AD.

About Fuel Injectors: trying to find out this number ...

[727]

Found It

Fuel injectors from kit are: #04891574AD (Mopar).

[johan]

E-mail me the files, they are corrupted in the post above.

[727]

Very strange ... I cant finish download file from my post.

I'll Send to you it tomorrow. Biggest thanks for answers!!!

[727]

(deleted post)

[johan]

OK man.