2008 5.3 tuning?

Predator support for GM gas vehicles

Moderators: 06MonteSS, mikel

Post Reply
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

2008 5.3 tuning?

Post by 08Chevy »

I have a 2008 Silverado with a 5.3 and 3.73 gears. What would be the best way to use the diable programmer to tune it?
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

RE: 2008 5.3 tuning?

Post by 08Chevy »

7 views and nothing huh. If you have the same truck as me, what do you have yall's set at?
Image
CANUCKPREDATOR
Posts: 1617
Joined: Sat Jan 05, 2008 6:58 pm

Post by CANUCKPREDATOR »

http://www.diablosport.com/index.php?na ... opic&t=917

Since no two engines will run alike, read and follow directions. :)
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

Thanks dude.
Image
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

Ok, well now I'm going to need to order the cable and can't find it on the home page. Can some one give me a link.
Image
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

I did the learn, I have the cables and shit. I did the LTFT. I was wondering what could I do for everything else?

I did the LTFT to 2%, and now I want to know what to adjust next?

Idle calibration=
In drive-?
Park/Neutral-?


COT=?


Power Enrichment=
2k-3.8k-?
4k-7k-?


Spark Calibration=
1k-1.8k-?
2k-3.8k-?
4k-7k-?
CANUCKPREDATOR
Posts: 1617
Joined: Sat Jan 05, 2008 6:58 pm

Post by CANUCKPREDATOR »

no need to change idle
COT is only if you've removed your cats
PE needs WOT logging
Spark Calbriation needs WOT logging
The last two are for WOT
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

How do I do WOT logging?
Image
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

I cant even upload my logings? did I download the wrong thing? I keep using the fucking practice one. This is pissing me off now.
Image
CANUCKPREDATOR
Posts: 1617
Joined: Sat Jan 05, 2008 6:58 pm

Post by CANUCKPREDATOR »

User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

I have read and did all of that. My cables do not recgonize that I have the programmer pluged in for some reason. Does it show in "my computer" that you have it pluged in?
Image
User avatar
mikel
Posts: 58783
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Post by mikel »

Need to install the driver for the USB to serial cable.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
User avatar
08Chevy
Posts: 33
Joined: Sun Jun 07, 2009 7:07 pm

Post by 08Chevy »

I'm using the diablo usb setup either. But I do have a serial to usb that I just bought and uploaded the drivers that came on the disk and I got my power supply thing from my friend that has a 06 silverado diablo predator also.
Image
Post Reply

Return to “Predator GM Gas”