Idle up not working

[jonster81]

I just updated the new u7131-9r03.crom file to my Predator U7131 and the idle up function dose not work. I drive a Dodge 2006, 3500 mega cab 4x4 5.9 diesel with no upgrades yet. Hope some one can help me out with this. I have it tuned to the extreme setting and that seems to work the best but I really don’t want to have any problems down the road. I drive all over the place up here in Canada and would like to get the best mileage and use the idle up feature in the winter.

[mikel]

Try disabling the idle up, then enable it.

[jonster81]

Do i disable it by pluging in the tuner and reloading it with the idle up function off and reloading the tune?

[mikel]

You can do it like this:

Go to the idle up feature, select disable, then cycle the key off/on
Then go back in, enable idle up, and cycle the key off/on again, that should do the trick.

[jonster81]

You are the shit. Thanks for the help, I bought my predator two years ago and the engin surge was so bad i never used the thing till the uther day i noticed the web site on the back of the tuner and started reading. Its nice to finde a product out there the helps i guy out, we dont see that kinde of service much up here in Canada. Any Suggestions on what to put in my truck to prevent damage? Thanks agian.

[jonster81]

[mikel]

Use the 100 HP economy tune for daily driving.

[motorjock]

Can the idle up feature be activated to work after a set number of minutes idling, or just when the outside temp is cold?

[mikel]

When you enable idle up, it is up to you when you turn it on in the truck.