Smoothing mds

malcolm47 · Post by **malcolm47** » Sat May 08, 2010 2:37 pm

i need my mds smoothing also feeling that surge when at highway speed

1.u7135
2.v.9r21
3. 2008 dodge charger r/t

Post by **mikel** » Mon May 10, 2010 10:44 am

looks like I just did this via email...?

iggy55 · Post by **iggy55** » Sun May 23, 2010 1:05 am

can i have my mds smoothed out please

Post by **mikel** » Mon May 24, 2010 2:22 pm

here you go

gliderider2003 · Post by **gliderider2003** » Wed May 26, 2010 9:34 pm

can I get a tune with mds smoothed out? Attached last tune file.
Also, can I use Tow/Haul with the performance tunes or is it not needed?

gliderider2003 · Post by **gliderider2003** » Wed May 26, 2010 9:58 pm

sorry-using U7137, v9r07, 2010 Ram 1500 5.7

Post by **mikel** » Thu May 27, 2010 9:22 am

gliderider2003 wrote:sorry-using U7137, v9r07, 2010 Ram 1500 5.7

here you go:

PTownBandit · Post by **PTownBandit** » Fri Jun 04, 2010 7:13 am

Netman66 wrote:I'm sorry to jump into this thread, but I just wanted to inject a comment that I'm sure everyone here would likely agree with.

Rather than smooth the MDS out by having everyone toss in their tunes for you to modify, why not include a line item in the Modify Tune screens to smooth MDS when selected? I'm sure your people can add that, no?

If this feature is added, then every time there is a new CROM you won't have to go through this exercise all over again.

As a new Predator owner who just experienced the MDS Surge i was reading this post from page 1 and after just a couple pages was thinking the same thing. As soon as any of the Octane Tunes are tweaked everyone is going to want that new tune and if their MDS surges they will want that tune tweaked all over again.

midnightmaraude · Post by **midnightmaraude** » Thu Jun 10, 2010 9:41 am

Could I please get the smooth out tweak as well?
1. 9r23b, U7135
2. 93oct CAI
3. 2006 300C AWD

Thanks

Post by **mikel** » Tue Jun 15, 2010 10:57 am

here you go

midnightmaraude · Post by **midnightmaraude** » Wed Jun 16, 2010 11:31 am

Thanks m8!

midnightmaraude · Post by **midnightmaraude** » Wed Jun 16, 2010 11:34 am

Question on this. The last written tune I uploaded and you smoothed had fans adjusted, shift limiter adjusted, shift tightened and set to 6000 along with mode 1 set. Will this all be enabled when I load the tune or do I need to start over from scratch?

Post by **mikel** » Wed Jun 16, 2010 11:35 am

Yes, that will all bethere.

If pred asks you if you want to reset parameters, choose yes.

midnightmaraude · Post by **midnightmaraude** » Wed Jun 16, 2010 11:38 am

won't reset parameters ...do just that? reset it all to basic tune settings?

In other words, I want all those parameters to be there. So should I really choose no?

Post by **mikel** » Wed Jun 16, 2010 11:55 am

no, let it reset the params or it will reapply all of the changes again...

Smoothing mds

mds smoothing

mds smootnig

Re: mds smootnig