Cant Register inTune

[Vas@Diablosport]

Thanks.

New update is not working.
The same problem.

in Vehicle Info:
"Unable to determine VIN and Calibration ID"

in Tune Vehicle menu:
"The vehicle is not supported"


Help me please!
E-mail: [email protected]

EGG 3.5L High Output V6 24V MPI Engine
DGJ 5-Speed Auto W5A580 Transmission

New info file here:

Save this reg file to your Intunes drive. Once the tool is registered, run the update software and let the updates load.

[Vas@Diablosport]

need help with registration also.

save this attached file to your PC and drop it into the Intunes drive to register the tool.

[Vas@Diablosport]

Hallo Mike,

ihave the same problem an i hope that you can help me. I bought a used restored InTune.
My problem is that I could register it but the registrationfile was not saved.
My Vehicle is a Chrysler 300 C 5.7 HEMI with a 5-Speed automatic transmission.
Thank you very much.

here you go

[Vas@Diablosport]

Mike (anyone else),

Can you please supply me with a registration file? (info file attached).

Thanks,
John

here you go

[J.Kidd]

Thanks Vas!

Apparently that was the key (proper registration file).

Installed the one you made for me and subsequently was able to upload the latest firmware successfully!

Thanks again!

[Vas@Diablosport]

Thanks Vas!

Apparently that was the key (proper registration file).

Installed the one you made for me and subsequently was able to upload the latest firmware successfully!

Thanks again!

[Bean406]

I am having the same issue