Page 2 of 2
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 9:52 am
by Vas@Diablosport
Vladimir5145409 wrote:
Thanks.
New update is not working.
The same problem.
in Vehicle Info:
"Unable to determine VIN and Calibration ID"
in Tune Vehicle menu:
"The vehicle is not supported"
Help me please!
E-mail:
[email protected]
EGG 3.5L High Output V6 24V MPI Engine
DGJ 5-Speed Auto W5A580 Transmission
New info file here:
Save this reg file to your Intunes drive. Once the tool is registered, run the update software and let the updates load.
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 9:56 am
by Vas@Diablosport
Datdirtys wrote:need help with registration also.
save this attached file to your PC and drop it into the Intunes drive to register the tool.
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 10:03 am
by Vas@Diablosport
donandyno wrote:Hallo Mike,
ihave the same problem an i hope that you can help me. I bought a used restored InTune.
My problem is that I could register it but the registrationfile was not saved.
My Vehicle is a Chrysler 300 C 5.7 HEMI with a 5-Speed automatic transmission.
Thank you very much.
here you go
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 10:06 am
by Vas@Diablosport
J.Kidd wrote:Mike (anyone else),
Can you please supply me with a registration file? (info file attached).
Thanks,
John
here you go
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 10:18 am
by J.Kidd
Thanks Vas!
Apparently that was the key (proper registration file).
Installed the one you made for me and subsequently was able to upload the latest firmware successfully!
Thanks again!
Re: Cant Register inTune
Posted: Thu Sep 10, 2015 10:28 am
by Vas@Diablosport
J.Kidd wrote:Thanks Vas!
Apparently that was the key (proper registration file).
Installed the one you made for me and subsequently was able to upload the latest firmware successfully!
Thanks again!
Re: Cant Register inTune
Posted: Thu Mar 24, 2016 6:43 pm
by Bean406
I am having the same issue