Diablosport Forums

mikel wrote:

sure, as long as its unlocked.

Thanks Mike, that's what I thought.

TC can be fully disabled with the tuner (takes out ESP and ABS)[/quote]

Is it possible to have TC fully disabled off the factory switch or could a cmr do it?

obisw4n wrote:Careful 2013 ram owners! Trinity has completely drained my battery on my truck, and its a known issue for some time and still not fixed by Diablo..

http://www.ramforum.com/f44/warning_201 ... sue-39258/

http://diablosport.com/forum/viewtopic.php?f=10&t=42665

I'll post this here as well in as you have posted this several times without making the adjustment, go to options/change sleep monitor's value to 60.

gunit wrote:How long till you have tranny support for the 2013 hemi ram 8 speed?

if you have a tuner, and have tuned your 2013 Ram, post your last tune written, and I will look at the trans parts of the tune and see what's currently in the tune template.

white_lightning wrote:

gunit wrote:How long till you have tranny support for the 2013 hemi ram 8 speed?

if you have a tuner, and have tuned your 2013 Ram, post your last tune written, and I will look at the trans parts of the tune and see what's currently in the tune template.

I don't have a new tuner yet, just wanted to find out all the options before buying

ive went through all of the instructions and updates but still cannot find my '13 ram

You have to chose the 13 Ram in the trinity itself, can't remember where it is exactly but it's not hard to find.

options/change vehicle type.

garrett wrote:options/change vehicle type.

yeah that's it, I knew I'd think of it

I just got my trinity for my 2013 5.7 8 speed and put in the 87 octane tune and bumped up the throttle response. This seems to be great
I also disabled the TC and is REALLY wonderful. Is there going to be an option where this can stay instead of reverting back?

I need help

How to download the update into my diablo to make it work for RAM 2013

alnabri wrote:I need help

How to download the update into my diablo to make it work for RAM 2013

which tool do you have?

Just want to confirm if the Dodge 1500 Ram 2013 with the batch VIN nos ending in 14 is also now supported?since i try 2 weeks ago and this VIN batch are not yet supported...regards...

Carseat-Qatar wrote:Just want to confirm if the Dodge 1500 Ram 2013 with the batch VIN nos ending in 14 is also now supported?since i try 2 weeks ago and this VIN batch are not yet supported...regards...

can you post your info file to the forum? The support is based on the calibration id of the vehicle.

Hey sorry to jump on to the thread but I'm experiencing an issue that you addressed.
The trinity and my dash lights turn on intermedadly when the trucks turned off.
Since day one I changed my sleep timer is 60. But the other day the battery went dead.
Just wondering if there's another fix.
The new rams are so power hungry. It has the upgrades altenator and battery but I think I may upgrade even further.