Problem with U7135 Calid 68041663AA

[dodgy]

thanks mike will try this today.

[dodgy]

Hey mike downloaded to predator ok now have v.9r27a but when i plugged it into car says i needed an update so conected it up to laptop for a calibration but wont work it keeps coming up with "server reported an unknown error please try again or contact diablosport" have tried it a number of times but still says the same any ideas ?

[dodgy]

when plugged into the car it reads "this vehicle needs an update download here diablosport.com/dcx calid 05187909ag

regards Dodgy

[johan]

Checking this out for you.

[dodgy]

many thanks

[johan]

Can you go to options>>troubleshooting show calid, post that here.
Then unplug the tool and plug it back in and try it again, there should be no updates for your calid as that is the one we added in.

[dodgy]

hey johan goes into trouble shooting and when i press show calid it wont come up says unplug and try again which i have done 6 times

[johan]

I have to ask, but this is with the Key in ON position right, and predator plugged into the vehicle.

[BlackCloud]

Just tried the lastest update with mine and it now works as it should
Sweeet...
Didn't ask for an update at all
Many thanks to Mike and all the guy's at DS your efforts are much appreciated

Hey Dodgy,
Hope you get yours sorted soon

Cheers,
Andrew

[dodgy]

hahaha im glad u asked i was sat in bed with it plugged into the mains haha plugged it into the car and the calid is pcm 05187909AG

[dodgy]

the predator calibbrated will try loading it to the car.......... fingers crossed thanks guys for your help

[dodgy]

SUCCESS ........WOOP........ WOOP ................. many Thanks guys for all your help working nicely now just did a test lap around the neighborhood and im sure nobody is asleep now haha can feel the differance and id say it was well worth the money.

[mikel]

NICE!

Thanks for being patient guys.

[[email protected]]

If you can fix there's back in 2010 why can I not use mine in 2023 come on

[mikel]

If you can fix there's back in 2010 why can I not use mine in 2023 come on

totally different device. U7135 had no issue working on export models.