Page 6 of 10
Posted: Fri Jun 08, 2012 12:09 pm
by BIGDADDY1969
..OK Mikel .... i'm on current version 1r02a ... ready for your TCM 4-speed auto (4l60e)
email ...
[email protected]
Posted: Fri Jun 08, 2012 12:43 pm
by BIGDADDY1969
Posted: Fri Jun 08, 2012 12:57 pm
by BIGDADDY1969
Posted: Fri Jun 08, 2012 1:48 pm
by AZ_Rider
Anyone else not being able to view TCM support on their InTune after software updated?
Posted: Fri Jun 08, 2012 3:59 pm
by AZ_Rider
Here's my info.xml file Mikel! Please sent me some TCM support!
Posted: Fri Jun 08, 2012 4:31 pm
by BIGDADDY1969
Posted: Fri Jun 08, 2012 4:41 pm
by AZ_Rider
1969, message sent!
Posted: Fri Jun 08, 2012 9:15 pm
by LGSONE
Crap late to the party, Updated the intune, so I email what... yes I read the post... just need clarification please...
Posted: Fri Jun 08, 2012 9:33 pm
by Oldsaltydog
Yup mines cooking with Tcm loaded hard shift tune this morning adjusted part throttle shift firmness still awesome
Never knew this would add so much to the drive ability factor and yp it squeals the tires on shifting at wot
Posted: Sat Jun 09, 2012 3:22 pm
by Oldsaltydog
Great job diablosport although there was lots of grumbling about this it was well worth the wait in my opinion.
GREAT JOB GUYS
Posted: Sat Jun 09, 2012 5:37 pm
by rthms20
What you guys setting shift pressures and torque management at? Going negative on torque management reduces it right?
Posted: Sat Jun 09, 2012 6:06 pm
by Oldsaltydog
Go into adjustable parameters firm or hard shift tune shift
It will show
Wot parameters and part throttle parameters
Firmer willbe negetaive towards leftsideof tool
Softer is positive towards right side of tool when changing settings I always reset all
Parameters
Posted: Sat Jun 09, 2012 6:09 pm
by Oldsaltydog
Here is what I'm running on hard shift tune
Part throttle shift -4 all gears
Wot throttle shift -2 all gears
No banging into next gear so farim dialing up a littleata time till it bangs then I will back off and run those settings
When I get to that point
Posted: Sun Jun 10, 2012 10:55 am
by pilotj
Can you send me the tune too??? Thanks!
Posted: Sun Jun 10, 2012 12:00 pm
by grucela
Mike,
Is the TCM support also for the 06 1500 GMC?