Page 1 of 1

Steeda 90mm CAI Problem / 93 Octane

Posted: Sun Apr 20, 2025 6:18 pm
by Blacksheep13
Hallo Guys,

have an issue with my Trinity t-1000 and my Mustang 2008 manuel 4.6 3v.

Have Installed a Steeda 90mm CAI with Stock tubing and tried to find the Right tune. Tried the Ford Racing 90mm and Steeda CAI tunning but Car feels pretty laggy. I only use Premium fuel and read about theres a Steeda 93 Octane Tune in later Versions of t1000 .

Current Version is 1r08j

Can you help with latest Update?

Thx

Re: Steeda 90mm CAI Problem / 93 Octane

Posted: Mon Apr 21, 2025 10:26 am
by mikel
what do you mean by steeda CAI with stock tubing?
is it the complete Steeda CAI as delivered by Steeda?

Re: Steeda 90mm CAI Problem / 93 Octane

Posted: Mon Apr 21, 2025 11:45 am
by Blacksheep13
My CAI is Just the 90mm MAF Housing, Shield and Filter. I dont have the High Flow elbow. You have to Take the OEM Intake Tube. Theres also a FRPP Branded Version but Same CAI

Tried the FRPP 90mm cai tune 91octane... Feels Same. No Power under 4500 rpm... FRPP 85 fells lil better but runs too lean.

Want the Power Of 93 octane Performance tune with BBK No Tune required CAI. This was Great but tune doesnt run with my MAF Housing

Re: Steeda 90mm CAI Problem / 93 Octane

Posted: Mon Apr 21, 2025 2:15 pm
by mikel
OK, unless the design of that intake has changed, I am not sure what could be causing an issue here. Are you sure the intake doesnt use any sort of a restrictor for use with no tune that can be removed for use with the tune?