Tried to shut mds on 2008 ram 1500

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Miker3967
Posts: 1
Joined: Fri Sep 08, 2023 5:11 pm

Tried to shut mds on 2008 ram 1500

Post by Miker3967 »

Followed directions to turn off mds and 91 octane started to install which I already had installed finished and prompt came to unplug and enjoy tune i hit continue to see if the mds could be turned off but tuner went dead along with truck took battery cables off for 30 minutes and when I plugged the cables back in all lights and dash came on but when turned key to start it clicked and all out again hooked up jumper but no dash or interior lights truck is dead any help thanks
User avatar
mikel
Posts: 58685
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Tried to shut mds on 2008 ram 1500

Post by mikel »

Please give us a call, 561-908-0040 with the device connected to the truck and a PC nearby.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”