Page 1 of 1
pc interface
Posted: Sat Dec 27, 2008 5:25 pm
by Robert688
My predator is not communicating with my pc. I already had problems with the program due to my pc running on Vista. Will the interface program work with Vista or do I need another download for that.
RE: pc interface
Posted: Sat Dec 27, 2008 6:25 pm
by 06MonteSS
is not communicating using what app??
are you using the usb cable? have the drivers installed for it?
check your Windows system settings (the device manager) and see what com port and baud rate it has setup for the usb cable...
make sure the com port is set to 1, 2, 3, or 4... and that the baud rate is set to 115,200... the DSDownloader should find it automatically after that... if you're using the E40 PCInterface app, when you start it up, make sure the com port and baud rates are set to the same numbers as whats in the Windows system settings for the usb cable.
RE: pc interface
Posted: Sat Dec 27, 2008 9:59 pm
by Robert688
I bought the PC interface (USB) which did not have installer program for Vista. A download was sent but is not working. Does not show up on my PC.
Posted: Sat Dec 27, 2008 10:55 pm
by CANUCKPREDATOR
Did you buy the cable from Diablo? If yes, try this
http://www.diablosport.com/beta/PL-2303 ... taller.exe
If you bought from elsewhere, talk to the people you bought from for a Vista driver.
Posted: Sun Dec 28, 2008 12:14 pm
by Grumpy_Aero_Guy
OR... upgrade your OS from Vista to XP...
Posted: Sun Dec 28, 2008 1:27 pm
by 06MonteSS
!!! ^^^^^^
ain't THAT the truth!!
Posted: Sun Dec 28, 2008 3:54 pm
by kfc
Vista = Windows ME v2.0
Posted: Sun Dec 28, 2008 4:33 pm
by CANUCKPREDATOR
ME = Microsoft Error