Page 1 of 1
2005 Mustang V6 U7140
Posted: Sun Apr 26, 2009 9:49 pm
by TJFT
I have a U7140 Preditor and I did a parameter change on the Tire Revs for proper Speedometer range for a set of 18" Tires. I did as follows: took the 20168 and devided it by the tire diameter of 18" and came up with 1120 and entered that into the tune. I have since driven the car and I think its not correct as I was flying down the road and that was at 40 MPH and prior to ever tuning the car I recognized what 40 mph felt like..this seems more like 70mph...any help?
RE: 2005 Mustang V6 U7140
Posted: Sun Apr 26, 2009 10:18 pm
by Mike_Levy
What size tires are you running and in what format do you need to diameter?
RE: 2005 Mustang V6 U7140
Posted: Mon Apr 27, 2009 10:55 am
by mikel
tire diameter of 18"
No way thats right, maybe 18" rim, not tire.
Also, it is 20618.
RE: 2005 Mustang V6 U7140
Posted: Mon Apr 27, 2009 10:00 pm
by TJFT
Mike the instruction that came with my manual shows in two different places 20168
RE: 2005 Mustang V6 U7140
Posted: Mon Apr 27, 2009 10:13 pm
by TJFT
Man did I goof it up...diameter is 27"..lack of sleep will do that, but Mike I did read tonight to double check and the U7140 did state the calculation to be 20168..is this a misprint as I have not DL the new updates yet. Thanks Tom
RE: 2005 Mustang V6 U7140
Posted: Tue Apr 28, 2009 8:53 am
by Vas@Diablosport
You are correct, the formula is 20168 divided by 27 which would be 747 revs per mile.
RE: 2005 Mustang V6 U7140
Posted: Sun Nov 14, 2010 11:18 am
by VinSpain
hi, i've 235-55-20" in my 05 V6 stang & i try to change that in my predator but no way how 2 do it, it appears in parameter 3,29 i divided 215/65 = 3,0 (215-65-16 stock wheel i guess ), what i have to do? how can i put the correct INCH & REVS per mile
P.S : sorry 4 my bad eng
