official word from DS on the 2003 and 2004 Dodge Rams
Moderator: mikel
-
bighemitex
- Posts: 242
- Joined: Wed Apr 29, 2009 12:57 pm
official word from DS on the 2003 and 2004 Dodge Rams
ok guys, i want to see some official answers from the diablo crew about the 2003 and 2004 Rams support.
Are we going to get TCM support or not?
I am seeing alot of posts on here where people are asking for it but we still dont have it.
Does the tcm support go for the rev, speed limit, and idle adjust too or all these all extra options you guys havent released yet?
do the 2003 and 2004 still have the ability to adjust for tire size and adjust wot fuel?
Are we going to get TCM support or not?
I am seeing alot of posts on here where people are asking for it but we still dont have it.
Does the tcm support go for the rev, speed limit, and idle adjust too or all these all extra options you guys havent released yet?
do the 2003 and 2004 still have the ability to adjust for tire size and adjust wot fuel?
-
Off_Road_Teacher
- Posts: 12
- Joined: Wed May 06, 2009 10:41 pm
RE: official word from DS on the 2003 and 2004 Dodge Rams
I would be interested in hearing an official word with some kind of an eta other than "coming soon.". I am keeping the faith that they are going to give us the trans options we need to have a complete product.
04 Hemi QC Laramie Sport 4x4. Debadged, Hella 500's, Fastman, Airaid, DSP, DMH, Flowtech, E-Fan, Flex-a-Lite, FM Super 40, Powerwire. Blacked Out Headlights/Grill/LED Tails/Handles/SSTips/07 20's/Third Brake/Front Spoiler/Ram’s Head/Amber Reflectors
RE: official word from DS on the 2003 and 2004 Dodge Rams
bump!!!
2003 hemi quad cab
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
RE: official word from DS on the 2003 and 2004 Dodge Rams
staying alive staying alive
2003 hemi quad cab
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
I'm not up on the truck interchangabilities but,
Is there some reason why you guys can't use newer PCM/TCM that is supported?
I didn't think there was a whole lot of hardware differences betwen 03/04 and 05.
Is there some reason why you guys can't use newer PCM/TCM that is supported?
I didn't think there was a whole lot of hardware differences betwen 03/04 and 05.
Needless Torque Calibrations
www.needlesstorque.com
www.needlesstorque.com
-
dickieshemi
- Posts: 38
- Joined: Sun Feb 15, 2009 1:46 pm
You guys are wasting your time. You will get the same answers from these guys as you did last month. The 2003 is now 7 model years old. i doubt you will get much more than what you got now. Your better off selling and buying a newer truck. Or go with a SC or SCT for that matter.
Look at it from their stand point. They already sold you the tuners based on limited funcionality in which you knew from the start. Just because they promised word of mouth means nothing. They are on newer vehicles and i doubt they will look back much. Just face it.
Look at it from their stand point. They already sold you the tuners based on limited funcionality in which you knew from the start. Just because they promised word of mouth means nothing. They are on newer vehicles and i doubt they will look back much. Just face it.
then let us waist our time and fyi the 03's were the best ram truck they came out with they just have a shitty computer if u dont have something encouraging to say or to help us with this problem then please do add ur bs here thanks
2003 hemi quad cab
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
aem bruteforce intake
mopar long tube headers
mopar high flow peformance cats
taylor10.2mm shortys
gipson side swept exahust
dmh electronic cut out
stoptech race performance cross drilled/slotted rotors
The 03's are a lost cause at this point. By the time diablo finishes up with the 09's, they'll probably jump onto the 2010's. They've obviously made no effort to go back to the 03-04 other than a response of "nothing new" if that. Nobody is supporting them sc,sct,diablo,hptuners-(in progress but for 04 and up) nor will they with that pcm setup. That's why when I wanted to mod more and needed cmr, I got rid of my 03. This was prior to diablo coming out and I was just planning on using Sean and SCT. Wasn't thinking about the year of vehicle since nobody had trans control anyway. But seeing where the 03-04 support is going with diablo, I'll either stack the superchips since they have full control over the trans or wait on hp tuners since they are actually working on tuning the dodges and not just telling people they will get to it.
http://www.hptuners.com/forum/showthread.php?t=19609
http://www.hptuners.com/forum/showthread.php?t=19609
2004 ram 2wd rc/sb
426 stroker
426 stroker
- mikel
- Posts: 58701
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Not for nothing, but the HPt software has been in testing forever...heck that thread was started over a year ago....
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
mikel wrote:Not for nothing, but the HPt software has been in testing forever...heck that thread was started over a year ago....
That's because they are not going to release a product that is half complete, otherwise they would be no different than what is going on here. Time consuming yes, but atleast they are working on it and not just giving empty promises.
2004 ram 2wd rc/sb
426 stroker
426 stroker