Mustang Question
- artillery114
- Posts: 3
- Joined: Sat Aug 01, 2009 4:39 pm
Mustang Question
ok so im about to get the u7146 programmer....and well i dont have any questions about the tune...but on my 2002 v6 mustang 5 speed.... i put 3.08 gears in it but it didnt give me the kick i wanted...i dont wanna go a full 4.11 or 3.79 gear cuz thats to much...i want somethin that will give me a kick in the seat but i also drive long distance down the high way at times and dont wanna make it guzzle gas...lol i had a buddy put 4.11 in his 04 gt and he had to fill up 2x in a 2 hour trip just to get there lol...
2002 Mustang 3.8Ltr V6...65mm Throttle Body, BBK Cold Air, Underdrive pulley, T5 5 speed, Ram Clutch kit, BBK Headers, Straight 2 1/4 stainless pipes into 18'' Glass packs with turn downs at axles, 3.08 Gears
RE: Mustang Question
5.13's!! Gotta make the most of the 190hp.
- mikel
- Posts: 58715
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Mustang Question
You're not going to get any sort of kick with anything less than 3.73s.
3.55s work well in a torquey V8, but not enough for a V6. 3.27 will be no discernable difference from your 3.08s, which prolly feel just as bad as the stock gears (2.73?)
3.55s work well in a torquey V8, but not enough for a V6. 3.27 will be no discernable difference from your 3.08s, which prolly feel just as bad as the stock gears (2.73?)
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]