2004 PT GT
Moderator: mikel
2004 PT GT
Just received my U7134 Predator, unit face is all scratched up, dirver disc is cracked, but I think I got around that, plugged unit into vehicle, says no calibration, calid = bunch of numbers, tried to look online for help and download latest version, mine is v.9r16, it will not, tried to call support, gave up after several tries of 20 mins on hold. So far not a real good experience!!
- mikel
- Posts: 58685
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: 2004 PT GT
Need to follow the calibration update instructions.
If you look at the Predator, it tells you to go to diablosport.com/dcx to do the calibration update.
If you look at the Predator, it tells you to go to diablosport.com/dcx to do the calibration update.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
Thanks Mike
DOH ...... I guess I jumped the gun a little as a NEW Predator owner, today I slowed down, did what the Predator told me to do, upped to the current version, got the proper calibration, put the performance tune into the car, and wallah, a screamin' PT GT just like you told me. Thanks again Mike.
- mikel
- Posts: 58685
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Thanks Mike
nice...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
Quick Questions
Being a new user, I am not sure, If I want to make an adjustment to add 100 rpm to "in drive" idle on the performance tune, what do i need to do ?? Also my stock tune boosted about 9-10, now I can do about 12-13 with performance tune. Should I leave it there with stock engine, my only other mods are cold air intake and 8MM wires. Thanks. Nick
Nickd,
go here: http://www.srtforums.com/forums/f384/
for all of your u7134 DSP questions. Very informative folks.
See you there
KB
go here: http://www.srtforums.com/forums/f384/
for all of your u7134 DSP questions. Very informative folks.
See you there
KB