Page 1 of 1

FRPP TB m-9926-v3 hangs at high rpm

Posted: Thu Apr 15, 2010 12:49 am
by Garydahl
I had my 08 Bullitt dyno tuned today and I now have excellent A/F ratio and good power. My mods are Kooks headers, catted h-pipe, Hot Rod cams, 4.10s, FRPP CAI and my FRPP Tb m-9926-3v. The problem I have is at 2000 to 3000 it takes a long time for the rpm to come down. I coast a long time before the rpms come down.
Other then that my engine revs nice. only when I go down the road with those rpms Im having problems.
Seeing as I have a custom tune will my adaptive strategy have any effect later on?
I was thinking of disconnecting my battery and to see if my car can recognize my FRPP twin 62mm throttle body.

RE: FRPP TB m-9926-v3 hangs at high rpm

Posted: Thu Apr 15, 2010 12:43 pm
by tuningss
Post your original backup file and last tune written here and someone will look at it.

RE: FRPP TB m-9926-v3 hangs at high rpm

Posted: Thu Apr 15, 2010 2:10 pm
by Garydahl
Do I e-mail it to tuningsuperstore or do I post on the forum. is it easy to post?

RE: FRPP TB m-9926-v3 hangs at high rpm

Posted: Thu Apr 15, 2010 2:37 pm
by tuningss
Either way.

Re: FRPP TB m-9926-v3 hangs at high rpm

Posted: Sun May 03, 2015 12:01 pm
by belzebu
I have the same problem, the engine from 3000 to 2000 rpm go down very slow and at 2000 don't decrease, how have you fix?
Thanks