Page 1 of 1
2010 Shelby gt500
Posted: Sat Jun 05, 2010 2:17 am
by jimmyking
I got the Trinity for my 08 gt worked great, now I have a shelby gt500, I must thank my wonderfull wife of 18yrs for that. Anyway will the Trinity support the new car? Are there any new downloads/updates to install? Love the guage layouts and options. Thank you
RE: 2010 Shelby gt500
Posted: Mon Jun 07, 2010 10:57 am
by mikel
Yes, Trinity works on all 07-10 GT500s....2011 coming soon!
Posted: Mon Jun 07, 2010 11:21 pm
by jimmyking
Thanks, Also I will not be doing any mods for a while, what can i get from the Trinity with the car in stock trim,HP,Tq? I will do a pulley,CAI,ect.. Are there tunes in there for these mods? AGAIN THANKS FOR YOUR HELP!!
Posted: Tue Jun 08, 2010 9:58 am
by mikel
Bone stock it will add about 30 rwhp-35-40 rwtq.
It has tunes for pullies and CAIs.
Posted: Wed Jul 07, 2010 9:46 am
by leftlane
Can I monitor the rear axle temp? My GT 500 is getting too hot here in the German highways. Wat would be the correct temp to set an alarm, if possible?
Next question: The speed display is only upto 160 kph. Is it possible to display speeds higher than 250 kph?
Thanks a lot for any reply.
Posted: Wed Jul 07, 2010 10:00 am
by mikel
I dont know if the PCM monitors axle temp...
Posted: Wed Jul 07, 2010 1:12 pm
by leftlane
Any idea how I could do that? What about the "Speed" question?
Posted: Wed Jul 07, 2010 2:33 pm
by mikel
The speedo will read however fast you are going...not sure on axle temp.
Posted: Sun Jul 11, 2010 5:38 am
by leftlane
Hello mikel,
you are wrong with the speed. I am just back from the highway. Trinity stops at exactly 158.4 mph. If you are faster it will show 0.00 mph, as soon as you go slower it will come alive again and displays speeds upto that point. Second problem: distance travelled is not recorderd, shows 0.00 mls. I also put my gauges to Celcius, kph, etc. On the datareader everything is in american units, such as fahrenheit, miles, etc.
What did i do wrong or what is wrong with the Trinity??
Further questions: What parameters are different to the standard vehicle tune using your tune for 93 octane? I only modified speed limiter.
Is the quantity of fuel at wot different? what else? I would like to know exactly what has been changed using the Trinity.
Sorry, if my english is not perfect, but tecnical things are not that easy to understand for a German, especially shortcuts like wot, cai, etc.
Regards
leftlane
Posted: Sun Jul 11, 2010 8:45 am
by tuningss
Modifications are fuel, spark, drive by wire, speed limiters, rev limiters, fan temps and alot more.
Posted: Sun Jul 11, 2010 10:14 am
by leftlane
Thanks for your sunday reply and th einfos. However, I had to take out the speed limiter manually. Seems strange. Do you know how the Trinity will log the speeds above 158.4 mls?
If not, I hope somebody from diablo will reply.