Page 1 of 1
Tranmisision Temp 2011 GMC 6.2L
Posted: Sun Feb 06, 2011 2:48 pm
by selmahotrod
My trans temp will not read on my on my Trinity. It reads fine on the truck gauge. Any help? Thanks, Mark
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Sun Feb 06, 2011 3:47 pm
by 06MonteSS
there's no tranny/tcm support, so the trinity can not communicate with the tranny/tcm... therefore, it will not display any info at all for the tranny....
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Mon Feb 07, 2011 9:46 pm
by selmahotrod
ok
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Fri Nov 25, 2011 4:22 am
by felipealonso
I was working with the same problem, so this is why it never reads any faulty errors from the tranny, it's not supported "YET" hope they will come out with some updates on this one.
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Fri Nov 25, 2011 1:35 pm
by Mike_Levy
The 6 speed trannys are now supported. 4 speeds aren't. Its still not gonna read transmission fault codes unless they're basic. The Trinity is not a full function scanner. It can only read a limited number of codes and modules.
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Fri Nov 25, 2011 2:25 pm
by 06MonteSS
yeah, I'm not even sure if tcm/tranny code reading/scanning was added as part of the tcm tuning update... so I don't think it will read/scan tcm trouble codes at all...
RE: Tranmisision Temp 2011 GMC 6.2L
Posted: Sat Nov 26, 2011 12:39 pm
by mikel
Hmmm..it should.