2005 Grand Cherokee - Gauge Test?
Posted: Wed Mar 09, 2011 9:54 pm
I tried searching, but could not find anything, can the trinity do the below? (from a 2005 Grand Cherokee 5.7L FSM)
"GAUGE TEST
Using a scan tool, the instrument cluster can check all the gauges. While in this mode, the EMIC will sweep the gauge pointer from low to high, stopping at predetermined points. Each gauge must be checked individually by selecting the specific gauge from the scan tool menu."
-mike
Clearwater, FL
"GAUGE TEST
Using a scan tool, the instrument cluster can check all the gauges. While in this mode, the EMIC will sweep the gauge pointer from low to high, stopping at predetermined points. Each gauge must be checked individually by selecting the specific gauge from the scan tool menu."
-mike
Clearwater, FL