Page 1 of 1
Puck switch position
Posted: Sat Aug 04, 2007 6:53 pm
by ch2037
I saw somewhere there was a discrepency on where the 60 & 90 HP positions were Does anyone know for SURE which location is what? TIA.
RE: Puck switch position
Posted: Sat Aug 04, 2007 9:29 pm
by duallydave
which one feels more powerful?i would guess thats the 90hp one
RE: Puck switch position
Posted: Sat Aug 04, 2007 10:21 pm
by tim_r73703
i ask the same question sometime back on the puck part of the forum, 90 is up 60 is down....whats listed on the web site is correct....its the one thats says "ok im confused" and it was answered by mikel
Posted: Sun Aug 05, 2007 1:19 am
by madmanwithmouse
90 is up 60 is down
the book is wrong,
or to be more clear... the side with the notch is 90; the middle is off; and the side without the notch is 60.
Posted: Sun Aug 05, 2007 7:44 am
by Dodgezilla
Damn!! I thought I was crazy when my truck felt stronger on the 60hp setting!!! Now that's funny........
Posted: Sun Aug 05, 2007 3:21 pm
by ch2037
They pretty much feel the same to me. Thanks for the info.
Posted: Mon Aug 06, 2007 11:46 am
by RAMnUTAH
On my 03' the puck feels strongest when the switch is opposite of the notch. Maybe the earlier model pucks are different???
Posted: Fri Aug 17, 2007 9:12 pm
by ash_flat_diesel
Just put one on an '06 & my '03 both the directions say the 90 hp is away from the notch. Is the paper that came with the puck wrong??
Posted: Sat Aug 18, 2007 9:32 pm
by madmanwithmouse
the book is wrong,
or to be more clear... the side with the notch is 90; the middle is off; and the side without the notch is 60
And there is a thread about this in the "powerpuck" topic section.