Page 1 of 1
2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 2:18 pm
by lo_truk04
To start, what i have a 2000 Silverado 4.8. i have done several recordings with my up to date trinity and am unable to view them on my comp. with the provided software. i have also hocked up my laptop to the truck to try and view and record live data and will not give any options in the side menu in the data viewer to pick from to view. is the not any support at this time to do any viewing or tuning at this time for my truck. the trinity unit as a stand alone has no problem that im aware of and has been working fine. looking to do some major tuning and work in the near future (turbo, injectors, cam etc.)
P.S. manual has been no help
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 3:24 pm
by mikel
does the dataviewer program find the trinity?
is the trinity driver installed?
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 4:09 pm
by lo_truk04
Yes. And yes
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 4:23 pm
by mikel
not sure then...are you using the latest 3.3.0.8 version of DV?
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 4:36 pm
by lo_truk04
I believe so but ill check just to make sure. If it is up todate what when, any other suggestions
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 5:00 pm
by mikel
Not sure, I've never seen such an issue.
RE: 2000 Silverado log and tuning
Posted: Mon Dec 12, 2011 5:28 pm
by 06MonteSS
in the dataviewer software go to HELP - Real Time Data Logging for info on how to get that working correctly while hooked up to your vehicle...