Page 1 of 1
Fan setting
Posted: Mon Jan 16, 2012 5:53 pm
by ccl088
I searched this and didn't find the answer I was looking for.
Background of mods:
2006 5.7 Charger w/removed resonators
Oil catch can
Stock engine
Volant CAI
93 Octane CAI Tune modified with MDS off.
Want to install Motorad 4128 185 degress tsat
What are my fan setting going to be?
Sorry if this is a repeat question..
RE: Fan setting
Posted: Mon Jan 16, 2012 5:59 pm
by Mike_Levy
181 for the LS, 188 or 189 for the MS and HS (no MS fan, so set MS and HS the same).
RE: Fan setting
Posted: Mon Jan 16, 2012 6:08 pm
by ccl088
Ok that would be for the Fan Speed AC on, What about Fan Speed AC off?
Or is it MPH AC Off?
RE: Fan setting
Posted: Mon Jan 16, 2012 6:10 pm
by Mike_Levy
All of them are the same, across the board. 181/188-189
RE: Fan setting
Posted: Mon Jan 16, 2012 6:11 pm
by ccl088
thanks I'll go with that and refer here if any more ?'s Thx
RE: Fan setting
Posted: Wed Jan 18, 2012 1:53 pm
by ccl088
I still don't understand what to set the "Cooling fans AC off" at. There are 6 different setting for this. I understand how to set "Coolong fans AC on" section! Help Please...
RE: Fan setting
Posted: Wed Jan 18, 2012 2:16 pm
by ccl088
I think I got it now. Those 6 settings are at LS,MS,and HS So I think what I need to do is set ALL the LS=181, MS=189, HS=189 in BOTH the AC on and off sections
RE: Fan setting
Posted: Wed Jan 18, 2012 2:29 pm
by Mike_Levy
Right.
RE: Fan setting
Posted: Wed Jan 18, 2012 2:42 pm
by ccl088
Thx again Mike. Done
Re: RE: Fan setting
Posted: Thu Jan 19, 2012 6:24 pm
by uscbrave
If he has a 185 deg stat, the LS fan should be set higher than 181
RE: Re: RE: Fan setting
Posted: Thu Jan 19, 2012 7:24 pm
by Mike_Levy
The Motorad 4128 is a 180. Plus, I have hundreds of people running these temperatures, and they work fine.