Page 1 of 1
VEHICLE NOT SUPPORTED Atten: Mike
Posted: Sat Feb 04, 2012 11:51 pm
by LarryHansen
05 Dodge Ram
u7137
crom 9r13
I press performance tune and the unit says Vehicle not supported.
Calid 5094258ab
pcm:56028958ai
tcm: 5094258ab
So what next? I called in to Tech and the helpful guy told me it was my tuner. So I bought a new tuner and it is the same thing?
Can ya help me out here Mike?
Thanks
Larry Hansen
RE: VEHICLE NOT SUPPORTED Atten: Mike
Posted: Sun Feb 05, 2012 2:30 am
by dls81927
06 Dodge Ram
U7137 / v9r13
When I open up DS downloader & let it auto connect it searched between COM1 & COM4. But when I troubleshoot for XP in PORTS it says COM6 and "the device is not working properly" Am I missing something?
Posted: Sun Feb 05, 2012 5:00 pm
by frenchbee2306
had the same issue with my '05 hemi ram
you must upgrade the PCM/TCM calid to :
PCM 56028958AI------>OK
TCM 05094258AD----->to get the trans. control
Posted: Sun Feb 05, 2012 10:34 pm
by LarryHansen
frenchbee2306 wrote:had the same issue with my '05 hemi ram
you must upgrade the PCM/TCM calid to :
PCM 56028958AI------>OK
TCM 05094258AD----->to get the trans. control
Thanks Frenchbee for the reply. Is that something the Diablo tech can do or
do I have to go to the dealer to get it done?
Posted: Mon Feb 06, 2012 5:11 am
by frenchbee2306
you're welcome...
what I did is to call a Diablo tech with the tool powered on to my truck and together we did a "forced calibration update"
this is an option in the "troubleshooting" menu that appear in the Trinity....I don't know if you got it in the Predator
Posted: Mon Feb 06, 2012 8:14 am
by LarryHansen
Thanks again FrenchBee..
Posted: Mon Feb 06, 2012 12:45 pm
by mikel
hmm...what if you pull the TCM fuse and try it like that?
Posted: Mon Feb 06, 2012 8:31 pm
by LarryHansen
I called in today and the Tech forced the calibration and all is good!
By the way the tech was very helpful and very professional. I will post up
the results as soon as my cmr tune is in and working.
Posted: Wed Feb 29, 2012 12:03 pm
by prowler2177
how do you force calibration if it says not supported? I am having the same problem. a tech took my info but has not gotten back to me.
Posted: Wed Feb 29, 2012 12:05 pm
by mikel
prowler2177 wrote:how do you force calibration if it says not supported? I am having the same problem. a tech took my info but has not gotten back to me.
give us a call with the tool powered up in the vehicle please.