2000 Silverado 5.3 Predator Tuning Help
Posted: Sun Mar 11, 2012 1:10 pm
I'm running the factory HP tune with trans mods to help soften the HD2 1-2, 2-3 shifts. The other morning I did some Real Time Data Logging on the way to work, approx. 26 miles. Truck runs great, but I'm struggling with fine tuning adjustments to the tune to optimize SFT/LFT's for example, among other paramaters. I'm overwhelmed with forum / technical advice and suggestions and need help.
My tuner is the U7198xv.9r15, Univ_Rev2.
Truck is a 2000 1500 ECSB Z71 4x4.
Mods include HD2 shift kit, Sonnax billet servos, KN CAI, 4.56's, 34" tall tires. Otherwise motor is stock. It's a daily driver that I tow up to 4,000 lbs with a couple times a year.
Getting ready to add a CD 3-3200 rpm 278mm convertor, Dearle deep extra capacity pan and fan cooled 40k cooler and 185* GM Perf. thermo..
I read the tuning for dummies section, but don't feel confident that I know, nor do I have the time to learn the "getting it right part."
I'm an aviation mechanic / commerical aviation chief as well as a FAA air safety inspector and custom bike builder.
Recommendations and feedback suggestions for my next move would be appreciated.
Thanks,
V1
My tuner is the U7198xv.9r15, Univ_Rev2.
Truck is a 2000 1500 ECSB Z71 4x4.
Mods include HD2 shift kit, Sonnax billet servos, KN CAI, 4.56's, 34" tall tires. Otherwise motor is stock. It's a daily driver that I tow up to 4,000 lbs with a couple times a year.
Getting ready to add a CD 3-3200 rpm 278mm convertor, Dearle deep extra capacity pan and fan cooled 40k cooler and 185* GM Perf. thermo..
I read the tuning for dummies section, but don't feel confident that I know, nor do I have the time to learn the "getting it right part."
I'm an aviation mechanic / commerical aviation chief as well as a FAA air safety inspector and custom bike builder.
Recommendations and feedback suggestions for my next move would be appreciated.
Thanks,
V1