Page 1 of 1

2006 mustang gt auto shift issue

Posted: Mon Jul 02, 2012 3:02 am
by agingtech
u7140
rev 9r09
2006 mustang gt, airaid cai, x pipe, 3.73 gears

I am running the airaid 93 firmshift tune and after the 2-3 and 3-4 shift the throttle backs off momentarily, but it happens after the shift. I dont have the ability to adjust the torque management in the programmer so what should i do???

RE: 2006 mustang gt auto shift issue

Posted: Mon Jul 02, 2012 10:41 am
by mikel
I dont know that this is a TM thing, I have never seen anyone else complain about it to be honest...please post the last tune written from the tool.

Thanks

RE: 2006 mustang gt auto shift issue

Posted: Mon Jul 09, 2012 5:40 pm
by agingtech
sorry for the delay...
last tune written was- airaid firm shift
calid:fble0g3

RE: 2006 mustang gt auto shift issue

Posted: Mon Jul 09, 2012 5:41 pm
by mikel
can you actually export the last tune written using dsdownloader and post it here?

Thanks

RE: 2006 mustang gt auto shift issue

Posted: Mon Jul 09, 2012 8:38 pm
by agingtech
it will take some time as i dont have the pc interface yet
i will order one next week

Re: RE: 2006 mustang gt auto shift issue

Posted: Tue Jul 31, 2012 6:54 pm
by bamachips
mikel wrote:can you actually export the last tune written using dsdownloader and post it here?

Thanks
"That's not a tune, if you're gonna use a tune use a mans tune" Three Amigos!!!

Re: 2006 mustang gt auto shift issue

Posted: Tue Oct 09, 2012 10:10 pm
by agingtech
i spent 4 hours trying to get a driver to work for the usb-serial cable and could not.
It seems like windows 7 doesnt like it so for now im screwed. On a separate note i reinstalled the stock tune in my car and then tryed to modify it for gear ratio and it would barely run and had several codes and wrench on the dash no throttle bla bla bla.
So i reinstalled the 93 airaid firm shift tune and it runs fine ecxept the shift issue.
not sure what to do now

Re: 2006 mustang gt auto shift issue

Posted: Wed Oct 10, 2012 9:40 am
by mikel
agingtech wrote:i spent 4 hours trying to get a driver to work for the usb-serial cable and could not.
It seems like windows 7 doesnt like it so for now im screwed. On a separate note i reinstalled the stock tune in my car and then tryed to modify it for gear ratio and it would barely run and had several codes and wrench on the dash no throttle bla bla bla.
So i reinstalled the 93 airaid firm shift tune and it runs fine ecxept the shift issue.
not sure what to do now
the stock tune will not work with the CAI installed.
Why not try the standard Airaid tune (non firm shift?)

Re: 2006 mustang gt auto shift issue

Posted: Wed Oct 10, 2012 10:04 am
by agingtech
i used the restrictor in the intake tube for the stock tune

Re: 2006 mustang gt auto shift issue

Posted: Mon Oct 15, 2012 5:17 pm
by agingtech
ok got a new cable and its working
here is the last tune written

Re: 2006 mustang gt auto shift issue

Posted: Fri Oct 19, 2012 2:16 am
by agingtech
Hello?

Re: 2006 mustang gt auto shift issue

Posted: Tue Oct 23, 2012 10:01 pm
by agingtech
Wow thanks for the reply Mike........

Re: 2006 mustang gt auto shift issue

Posted: Wed Oct 24, 2012 9:07 am
by sohfast94
ITs cool. Maybe he just missed it. The new forums are a little different to work with for us. Try this and see how you like it. Make sure you choose your original backup for the second file after selecting this file as the first one.

Re: 2006 mustang gt auto shift issue

Posted: Wed Oct 24, 2012 9:43 pm
by agingtech
sohfast94 wrote:ITs cool. Maybe he just missed it. The new forums are a little different to work with for us. Try this and see how you like it. Make sure you choose your original backup for the second file after selecting this file as the first one.

Thanks sohfast94 i will try it soon, the car is off the road for winter but next nice day i will load it up and try it out.
:P