Page 1 of 1
Transmission Temp
Posted: Wed Nov 14, 2012 5:41 pm
by dukercan
I have included a guage for Trans temp on my T1000 monitor but its stays at 0C. 2010 Tahoe 5.3. Any suggestions? Thanks
Re: Transmission Temp
Posted: Wed Nov 14, 2012 5:48 pm
by Mike_Levy
Don't you have Trans temp in your information center in the dash? I think thats the only way to see it. The PIDs in the Trinity don't seem to be able to see it on the GMT900's.
Re: Transmission Temp
Posted: Wed Nov 14, 2012 6:52 pm
by dukercan
It is on the IC... but I wanted to have Tran temp/Oil temp/coolant temp and MPH on the T1000 as I drive with the trailer attached. It is a good monitor of what is happening under the hood when trailering, along with MPH since the speedo is KPH... and I am driving in the US...!
Re: Transmission Temp
Posted: Wed Nov 14, 2012 7:08 pm
by mikel
cant get PIDs from the PCM and TCM, so we only do PCM....