Diablosport Forums

Hey guys, I have a 2011 chally 6 speed. Last week I had the car dyno tuned w the InTune from a reputable shop. I had srt headers and cats installed at same time. I am however, having a few issues. I've tried to raise the rev limit buts its still kicking me down at about 5700- 5800 rpms. Shop had it at 6200. I raised it to 6400 and still the same results. Should I max it out at 6600? I know, I don't want it that high.... I would like it to be 6000- 6100.

2nd issue... is my skip shift seems to come on a lot now. I read in another thread that mike could shut it off.

3rd ... Throttle boost. I raised it to 10%. Didn't really do much . I have a liitle hesitation in First gear. I guess ill max it out at 20% and see how that is. What would you recommend? I hate to keep screwing w the tuner and loading tunes on and off.

Last ... shop has the AC fans set to off . Is that right?

I hope Mike is listening ... Don't get me wrong the car now has some nice midrange power now. According to Dyno jet shes at 374 rwhp & 409tq. I just would like to get these smaller issues cleared up. Thanks John N

please post a copy of the last tune written

I think this is it.. Thanks in advance

jnodalny wrote:I think this is it.. Thanks in advance

try this one, limiter set to 6600

alright I put it on, and put throttle up to 20%. Your file is saying not downloaded yet but I got it on InTune and car took it. Im assuming it saying not downloaded yet because I didn't put it on my computer. InTune did recognize the file . Does that sound right to you? Ill test car out later when I go to work then get back to you tomorrow. Are you able to turn off skip shift? thanks

you have to load that tune to the intune, let it import, then go to the car and load the custom tune...

Disregard, it says downloaded 1 time now. I did it right. get back to you tomorrow

Hey Mike, It seems a little bit better . Digital readout looked like it got very close to 6000 last night , looked like 5920 was the last number I saw. Honestly though it could have been doing that before. I would like it to go as high as 6100 before it kicks me down. I don't plan on shifting at 6100 but figuring if i over shoot a little, i would prefer not falling on my face. Is their anything else you can do?

Throttle boost is working better at 20% though... so that's good

Are you able to turn off my skip shift completely? ...Its kind of annoying now

Thanks John N

try this

jnodalny wrote:Are you able to turn off my skip shift completely? ...Its kind of annoying now

None-gear-head question, what is skip-shift?

the pcm forces you to go from 1st to 4th gear, thus skipping 2nd and 3rd for economy purposes.

Ok Mike , Skip shift is off. Rev limit is about as high as engine will let it go to. I think the 5.7 will only really rev till about 5950 before its just to much for it. Car is good now . Thanks for your help. Tech support is great w you guys. Its nice to know that your not just buying the tuner your getting the tech support w it. I am Happy......Thanks John N