Page 1 of 1
'12 JKU gear update
Posted: Sun Jun 23, 2013 10:14 am
by mudhog99
I need 5.13 gear ratio option. Any idea when it's coming? Had to purchase AEV Procal so I could drive after getting new r&p
Thanks
Re: '12 JKU gear update
Posted: Mon Jun 24, 2013 2:51 pm
by Xenowulf
I'd like to know this too.
Re: '12 JKU gear update
Posted: Mon Jun 24, 2013 4:13 pm
by mikel
Still in testing, shouldn't be too much longer.
Re: '12 JKU gear update
Posted: Thu Jun 27, 2013 2:50 pm
by Xenowulf
Another gearing question. I have a 2012 Rubicon with factory gears (4.10) and factory ties 255 / 75 17. the speedo and my GPS showed the same (i.e. 80 on jeep 80 on GPS) Now I have BFG 35 ATs. at 85 on the jeep my GPS says 81-82 and that's set at tire size at 34.5" at 35" it's just way of.
Re: '12 JKU gear update
Posted: Thu Jun 27, 2013 3:06 pm
by mikel
most 35's do not actually measure out to 35".....
Re: '12 JKU gear update
Posted: Thu Jun 27, 2013 3:40 pm
by Xenowulf
I know theses tires are exactly 34.7 inches... at max load of 2555 lbs and 35 psi on each tire.
mikel wrote:most 35's do not actually measure out to 35".....