Page 1 of 1
2011 Charger R/T trinity 1r11b problem
Posted: Tue Mar 25, 2014 7:12 pm
by MACADO1
My Trinity is now updated to 1r11b and still have a problem after a tune is installed. When Connected to vehicle every warning light on the dash comes on, with a "no buss" msg. along with the wipers coming on. Also the starter on/off button will would not respond unless I pull the obdII connection. I have 2 1/4 mile races this weekend and hope to get this resolved. I can still send a tune to the vehicle and adjust settings but can not use the tool plugged into the vehicle whilst running.
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Tue Mar 25, 2014 8:11 pm
by MACADO1
UPDATE UPDATE!!!!
I have found the problem. The cable leading into the Trinity is causing the problem. It has became loose and is causing the problem with data logging on the device. I am glad this never caused a problem with writing a tune to the vehicle or original backup. Now how can I get another cable from Diablo or will another aftermarket cable will work with the Trinity.
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Tue Mar 25, 2014 8:18 pm
by MACADO1
I am so glad Diablo has a new cord in the store but I need one by Thursday. I will try to contact the sales team tomorrow to see if I can get it faster. Check your cords people as that can be one of the problems.
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Wed Mar 26, 2014 11:16 am
by mikel
good find
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Wed Apr 16, 2014 5:55 am
by alengineer
i faced cutoff 4 times within 1 week after installed 1r11a (durango v8 2012) .... any reason why??
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Wed Apr 23, 2014 2:02 pm
by alengineer
no response
Re: 2011 Charger R/T trinity 1r11b problem
Posted: Wed Apr 23, 2014 3:56 pm
by mikel
Im not sure what you mean by 'faced cutoff'?