Page 1 of 1

Pyro temps

Posted: Mon Aug 18, 2014 7:38 am
by CANUCKPREDATOR
What are acceptable temperatures to see for the pyrometer? I have the Diablo pyro installed on my 2009 GMC. Highest temp I've seen so far was 1100 degrees. The diesel shop that I frequent says if I see 1400, "Back off, melt down imminent". So far I have set myself a warning light at 1000 degrees to give me a heads up that I'm getting high and plenty of time to do something about it.

Suggestions?

Thanks

Re: Pyro temps

Posted: Mon Aug 18, 2014 11:42 am
by mikel
pre or post turbo?

FWIW, its tough to get a dmax too hot, at least with our tunes :)

Re: Pyro temps

Posted: Thu Aug 28, 2014 9:25 am
by CANUCKPREDATOR
Pre turbo

Re: Pyro temps

Posted: Thu Aug 28, 2014 9:44 am
by mikel
you are fine.

Pre turbo id try to keep it under 1300°