Page 1 of 1
How do I fix this.
Posted: Sat Aug 23, 2014 12:48 pm
by Brian2797
A few months ago I had to swap out my stage one computer to get my car to pass emissions. At the time the stage one had a custom tune in it. I simply took the computer out of the car with the custom tune still in it. I put in a stage 0 computer, but I had to have the misfire code disabled on that computer as well. I had to use the diablo to install a custom tune onto the stage 0 computer to disable the misfire code. When I did this I had to copy the original backup from the stage 0 computer. Fast forward to today, I put the stage 1 computer back in the car, and I cant get into to see which tune is in there. I have the original backup for both computers, but can't get the diablo to install a custom tune onto the stage one computer. Any ideas??? Thanks
Re: How do I fix this.
Posted: Sat Aug 23, 2014 1:37 pm
by Mike_Levy
Did you do a restore onto the Stage 0 computer?
Re: How do I fix this.
Posted: Sat Aug 23, 2014 1:44 pm
by Brian2797
Mike_Levy wrote:Did you do a restore onto the Stage 0 computer?
Before I took it out? No, but I have both original backup files.
Re: How do I fix this.
Posted: Sat Aug 23, 2014 3:16 pm
by Mike_Levy
You need to restore the Stage 0 before you can write the Stage 1. The tool will only write to one PCM at a time.
Re: How do I fix this.
Posted: Sat Aug 23, 2014 3:36 pm
by Brian2797
How do I do this? I put the stage 0 back in and still couldn't get it work.
Re: How do I fix this.
Posted: Sat Aug 23, 2014 6:14 pm
by Mike_Levy
It wouldn't let you restore? Humm..... thats strange. Gonna have to wait for the tech guys on Monday. This is more complicated than I thought it would be.