Page 1 of 1
2014 Cruze bogging down
Posted: Thu Apr 30, 2015 11:49 am
by Jgillette72
i loaded the 91 octane program for my Cruze 1.4T now it bogs in between gear shifts. any ideas?
Re: 2014 Cruze bogging down
Posted: Thu Apr 30, 2015 11:50 am
by mikel
close up the plug gap a bit...
Re: 2014 Cruze bogging down
Posted: Thu Apr 30, 2015 11:52 am
by Jgillette72
not to sound stupid, but how much is a "bit"?
Re: 2014 Cruze bogging down
Posted: Thu Apr 30, 2015 12:18 pm
by mikel
Im not sure what they are at stock, but ideally you want to be at about .030
Thans
Re: 2014 Cruze bogging down
Posted: Fri May 01, 2015 5:56 pm
by Jgillette72
files you requested
Re: 2014 Cruze bogging down
Posted: Fri May 01, 2015 5:57 pm
by Jgillette72
sorry, can you get previous attached files to Michael Litsch?
Re: 2014 Cruze bogging down
Posted: Mon May 04, 2015 6:36 am
by Jgillette72
checked gap, they are set .028. i reloaded factory tune. worried about hurting engine now.
Re: 2014 Cruze bogging down
Posted: Mon May 04, 2015 8:27 am
by Zach
How many miles are on the plugs? Just wondering the condition of them. If they are in good shape, could you gap them to .024-.025?
Also, the log isn't showing me Manifold Pressure, could you please add that to the log list. You'll go to Datalogging>Configure>PID select> to add it to the list.
What octane fuel are you running?
Re: 2014 Cruze bogging down
Posted: Tue May 05, 2015 9:57 am
by Jgillette72
the car has 6000 miles. i'll regap to .025 and add manifold pressure to log, i'm running 93 octane.
Re: 2014 Cruze bogging down
Posted: Tue May 05, 2015 11:49 am
by Jgillette72
I've decided to return InTune and go with something else. thanks.
Re: 2014 Cruze bogging down
Posted: Tue May 05, 2015 12:05 pm
by mikel
Best of luck with your next choice.