Page 1 of 1
Rev limiter settings
Posted: Sun May 17, 2015 8:46 pm
by rbrewer614
While at a test and tune today I had a friend drive my truck on the track. He said at the end of the pull that he could only get 2500 rpms on take off and was thinking he should have been able to get at least 4000. The question is, is there an adjustment I'm missing to get a higher WOT off the line? I was using the rkl tune on my 1r12 version cal # 25325351AG. Thanks in advance. I'm looking for a tuner in the Toledo NW OH area to maybe get a custom tune and dyno. Other then the rpm issue truck is running great.
Re: Rev limiter settings
Posted: Mon May 18, 2015 11:44 am
by mikel
No, thats a function of the torque converter...
Re: Rev limiter settings
Posted: Mon May 18, 2015 4:57 pm
by rbrewer614
But I have a manual. Sorry just noticed in sig that that's not in there.
Re: Rev limiter settings
Posted: Mon May 18, 2015 5:18 pm
by mikel
Ahh, OK, maybe there is a neutral rev limiter, unfortunately I have no means of defeating that currently.
Thanks
Re: Rev limiter settings
Posted: Mon May 18, 2015 5:33 pm
by rbrewer614
Hey no worries. Didn't know if adjusting the top end would help or not. Just wanting to launch at about 3000 rpms and take it to 4000 down the track. Guess I can wait til I get new injectors in it and look at some custom tunes.
Re: Rev limiter settings
Posted: Sun May 24, 2015 4:34 pm
by rbrewer614
Ok let me ask this. With the S366 turbo, and the mods I have now. What would be the best rkl tune to run to get the most out of my turbo?
Re: Rev limiter settings
Posted: Thu May 28, 2015 10:09 am
by mikel
might need to experiment, thats not something we have spent much time testing
