Caliber srt4 miss firing
-
lcpld48180
- Posts: 2
- Joined: Sat Jan 03, 2015 7:03 pm
Caliber srt4 miss firing
I recently developed a problem with my intune. If I go past 10 lbs of boost the car starts missing and jerking around I've tried adjusting the tune to no luck. I am only trying to run 16 lbs of boost.the car ran fine during the summer but winter has been a huge problem.
- mikel
- Posts: 58709
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Caliber srt4 miss firing
anything change on the car?
is it ok with the stock tune?
is it ok with the stock tune?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
Re: Caliber srt4 miss firing
Have you changed the plugs and gapped them like you're supposed to?
Insert Clever comment here...

Please do not PM me as I rarely see the notifications.

Please do not PM me as I rarely see the notifications.
-
calisrt4washington
- Posts: 1
- Joined: Sat Mar 05, 2016 4:52 am
Re: Caliber srt4 miss firing
My caliber kinda does the same thing. Now that I have downpipe it pulls quicker and boosts quick. Boosts to 10 psi then it stops and once it's goes to 8 it will boost up to 10 again. Thier any way I may increase my boost psi? Sorry if it sounds nooby. I am new to this world of boosted cars
I just connected my intune tonight. It's on the basic Diablo sport tune. I have not got a chance to drive it yet. Got to late. But early in the am I'll do so. Thank you in advance.