Diablosport Forums

I am trying to do some data logging, but every time that I try to view, none of the PIDs are showing. It only gives me three analog inputs, Analog 1 Analog 2 and Batt. V

No idea whats going on here.....any insights as to why I can't seem to view the raw data from the file in the app?

are you seeing PIDs on the intune when recording in the vehicle?
Using the default list?

Yes, they show fine on the tool when doing the data log. But when I go to view on the computer nothing comes through.

can you post one of the logs here?

I can do that when I get home from work today....on another note, with the GM truck tunes is the Diablo Tune good for 91 octane or just 93? I'm sure it's been asked a million other places but got lazy and didn't want to search.

Thanks for the help.

on the trucks Diablo tune is for premium fuel, 91 octane minimum.

Thanks

Here is a log that I ran today. Sorry it took me a while.....was traveling.

Also, seems like my fuel trim is trying to lean it out way too much.....it's showing long term at idle @-30 on both banks, also alcohol ratio way off.....pulling through that at 70%. I'm getting the alcohol ratio reset at the dealer, any other thoughts on these two issues?

Only things done to the truck, 2010 Chevy Avalanche, are intake and exhaust.

LS3Sedan wrote:Here is a log that I ran today. Sorry it took me a while.....was traveling.

Also, seems like my fuel trim is trying to lean it out way too much.....it's showing long term at idle @-30 on both banks, also alcohol ratio way off.....pulling through that at 70%. I'm getting the alcohol ratio reset at the dealer, any other thoughts on these two issues?

Only things done to the truck, 2010 Chevy Avalanche, are intake and exhaust.

all th epids are there for me, are you using current DV from website?

Yes I even uninstalled and re-downloaded to see if that would correct the issue but none of the PID's are view able for some reason.