PCM Calibration Needed
PCM Calibration Needed
I traded in my Challenger... returned to stock and unmarried the unit. I tried to install it on a 2012 Ram... It said I needed pcm update. I went through all of the process to get it installed to i2 software and updated everything. I put it back on the Ram and it said PCM updated... I thought maybe I missed something so I put it back on the computer. It said it was all up to date. I put it back on the Ram and it said it needed pcm update. Any ideas what's going on here?
Thanks!
Gordon
Thanks!
Gordon
- mikel
- Posts: 57806
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: PCM Calibration Needed
please post he info.xml file from the i2 drive.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: PCM Calibration Needed
Thanks Mike!
I'm not sure why the dates on everything in the INTUNE directory say 12/31/2010 if I'm supposedly updating files when I run the updater. I attached a few screen caps along with the info.xml file. I appreciate the assistance.
I'm not sure why the dates on everything in the INTUNE directory say 12/31/2010 if I'm supposedly updating files when I run the updater. I attached a few screen caps along with the info.xml file. I appreciate the assistance.
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57806
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: PCM Calibration Needed
its working fine, it downloaded the file for me.
save this to the i2 drive, let the too limport t then go to the vehicle and load the update then you can load the tunes.
save this to the i2 drive, let the too limport t then go to the vehicle and load the update then you can load the tunes.
You do not have the required permissions to view the files attached to this post.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: PCM Calibration Needed
I've been following a few threads about calibration needed, I'm running into the same issue. 2014 Dodge Ram. I'm using a Mac, I've downloaded the latest firmware and followed the steps but I keep on getting the same message.
Here's what I have so far
Also, when I try to drag and drop the tune for 2011-2014 Dodge/Chrysler/Jeep, it says my tuner is not compatible with that tune
https://forum.diablosport.com//download ... p?id=13161
Thanks a lot!!
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57806
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: PCM Calibration Needed
please attach the info.xml file from the intune drive.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: PCM Calibration Needed
Right, sorry, i posted it wrong. Here's the info xml
Thanks again!
Thanks again!
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57806
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: PCM Calibration Needed
you have a standard i-1000 there, it will not work on the 2013 model you are trying to tune, that requires the older i-1000-dcx or current i2010.outrid3r wrote:Right, sorry, i posted it wrong. Here's the info xml
Thanks again!
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: PCM Calibration Needed
Thanks for getting back to me
Re: PCM Calibration Needed
i have a 2013 dodge ram 5.7 i had to bring it in because the trans wasn't shifting so i look the tune off and they did a PCM update and now so says it calibration needed i tired to update it but theirs no updates for it
- mikel
- Posts: 57806
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: PCM Calibration Needed
post the info.xml file from the intune drive please.1yota91 wrote:i have a 2013 dodge ram 5.7 i had to bring it in because the trans wasn't shifting so i look the tune off and they did a PCM update and now so says it calibration needed i tired to update it but theirs no updates for it
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: PCM Calibration Needed
<?xml version="1.0"?>
-<tool_info>
<main svn="9115" sw_rev="1r04j" full_version="InTune-1r04j 03/14/2016 10:51:37 AM"/>
<registration status="0" sn="J2BT881-4"/>
<cal_id PCM="68089639AM"/>
<restore bc="6" vin="3C6JR6AT2DG501633" id="0"/>
<system_db vin="1r01g" dtc="1r01a" info="1r01b"/>
<db pid="1r01b" tune="1r01v" mfr="DCX"/>
<db pid="1r01b" mfr="FORD"/>
<db pid="1r01a" mfr="GM"/>
<license tuned="0" avail="1"/>
<unsupported vin="3C6JR6AT2DG501633" oem="DCX" calid="68089639AM"/>
<updates count="4"/>
<oem tool_oem="DIABLODCX"/>
<reg reg="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"/>
</tool_info>
-<tool_info>
<main svn="9115" sw_rev="1r04j" full_version="InTune-1r04j 03/14/2016 10:51:37 AM"/>
<registration status="0" sn="J2BT881-4"/>
<cal_id PCM="68089639AM"/>
<restore bc="6" vin="3C6JR6AT2DG501633" id="0"/>
<system_db vin="1r01g" dtc="1r01a" info="1r01b"/>
<db pid="1r01b" tune="1r01v" mfr="DCX"/>
<db pid="1r01b" mfr="FORD"/>
<db pid="1r01a" mfr="GM"/>
<license tuned="0" avail="1"/>
<unsupported vin="3C6JR6AT2DG501633" oem="DCX" calid="68089639AM"/>
<updates count="4"/>
<oem tool_oem="DIABLODCX"/>
<reg reg="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"/>
</tool_info>
Re: PCM Calibration Needed
sorry i posted it wrong lol
You do not have the required permissions to view the files attached to this post.
Re: PCM Calibration Needed
Try running the updater now.1yota91 wrote:sorry i posted it wrong lol
Re: PCM Calibration Needed
it updated and now is being installed on my truck. thank you very much