Page 1 of 1

PCM Calibration Needed

Posted: Thu Dec 22, 2016 1:22 am
by scott57rt
I'm helping a friend upload a diablotune to his vehicle for the first time. We are unable to upload the tune. It looks like we are having a similar problem as some others on here. The tuner says the car is unsupported and needs a PCM update. We have updated the tuner software using IntuneUpdater2.exe, but it still gives the same error. The car is 2012 Charger SuperBee. I can provide the info.xml if needed.

Re: PCM Calibration Needed

Posted: Thu Dec 22, 2016 9:29 am
by mikel
please post the info.xml file here.

Re: PCM Calibration Needed

Posted: Thu Dec 22, 2016 11:11 am
by scott57rt
see attached

Re: PCM Calibration Needed

Posted: Thu Dec 22, 2016 12:10 pm
by mikel
please run the updater again now and it will download the file you need.

Thanks

Re: PCM Calibration Needed

Posted: Thu Dec 22, 2016 8:17 pm
by scott57rt
Thanks Mike. It looks like the intune was able to download a new update. I'm not sure I understand all the magic you did behind the scenes, but it looks like it worked. I'll let you know if we have any problems with the pcm update on the car.