Diablosport Forums

Posted: **Sun Jul 01, 2018 10:48 pm**

hi,
after update the oem program, the rev can not be setted up cuccessfully.

I wanna set my vehicle rev limit to 7000r/min in gear "D/S", but it failed. I have tested my car in gear "S" , the rev was limited at 6200+ r/min. and I also tried it in manual gear , it be limited at 6850r/min.

I will upload my info and last tune later.

Posted: **Mon Jul 02, 2018 12:45 pm**

6850 is likely the TCM limiter, If you set it to 7K and managed to get 6850 in manual mode than thats all its got to give with tcm programming

Posted: **Mon Jul 02, 2018 7:36 pm**

mikel wrote:6850 is likely the TCM limiter, If you set it to 7K and managed to get 6850 in manual mode than thats all its got to give with tcm programming

hahaha， i see, thx mikel

Diablosport Forums

chrysler 300 2013 rev set in D/S set failed

chrysler 300 2013 rev set in D/S set failed

Re: chrysler 300 2013 rev set in D/S set failed

Re: chrysler 300 2013 rev set in D/S set failed